GPS dongle for Kenwood FleetSync and NEXEDGE portable radios
The GPS-511-NXQD adapter uses Kenwood multi-pin radios FleetSync or NEXEDGE protocol to send geographic location data over the radio system. The dongle attaches to the radio's universal device connector port and secures with a thumbscrew. The GPS-511-NXQD draws power from the radio and is active while the radio is powered on, and constantly feeds the user's GPS coordinates and other data to the radio, which can be sent over the air.
The GPS-511-NXQD uses the same data format as Kenwood GPS mics, and can be used along side of any mapping or tracking software that supports Kenwood GPS microphones.
Features :
Compatible with FleetSync and NEXEDGE capable radios that have a multi-pin Universal Device Connector, such as the NEXEDGE NX-200/300, Kenwood TK-5210/5230/5410, and the TK-5220/5320
Compatible with all of Pryme's QD accessories
Contains a high-sensitivity GPS receiver that can accurately measure the radio's location within 10 meters, altitude within 50 meters, velocity and heading
Determins location typically in less than 30 seconds from power on (cold start) under open sky conditions
The adapter is powered directly by the radio, requires no recharging
Bright status LED indicates operation
Does not affect operation of the radio's internal speaker and microphone
Receiving location reports over-the-air requires a properly programmed FleetSync or NEXEDGE compatible radio at the base station location and a computer running GIS/CAD software (not included)
This adapter is not compatible with Pryme CheckPoint software
