The FR6300 is a 50W, high duty cycle, 32 channel VHF/UHF repeater combining analog FM and IDAS digital mixed mode operation, and sporting the same looks as the FR6000, but with a new CPU/FPGA platform
Features:
New CPU/FPGA
450-512 MHz
50W
Two cooling fans
Improved LCD/drivers
IP remote maintenance
Ability to have two in one chassis
RC-FS10/VEPG4 connectivity
PTT Priority
DTMF encoder/decoder
Low voltage alert
The 12-digit alphanumeric display, 5 programmable buttons, 32 memory channels and internal speaker enable you to use the repeater as a simple base station, or to check repeater activity. The LCD shows a variety of text and code information.
FR6300 series can receive both analog and digital modes on a channel, and transmit either mode, depending on the programming. The feature decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code.
The FR6300 series provides digital simulcast system capability and ±0.1 ppm high frequency stability with a 1 pps reference signal from the GNSS antenna
System scalability of the FR6300 series can be done easily by installing an optional UC-FR6300 Network/controller board and software provided with a CF card. Depending on the communication density and coverage, your radio system can grow from a single site to a simulcast system or multi-site trunking*system, to match your communication needs.
